Deionised (DI) water is tap water with the dissolved minerals taken out by an ion exchange resin. Those minerals are what dry into water spots, so a final rinse with DI water leaves paint and glass free of mineral marks. A cartridge such as the Aquaspray Spotless Inline Water Filter fits your existing hose; see our water filters and resin.
What causes water spots on a car?
Water spots are the minerals left behind when tap water evaporates on the paint or glass. The harder your water, the more minerals there are to leave behind, which is why spots are worse in hard water areas and on warm, sunny days when water dries quickly.
Fresh spots are deposits sitting on the surface, and it is far easier to stop them forming than to take them off later.

How does a deionised water filter work?
Water flows through a vessel of mixed bed resin, which swaps the dissolved mineral ions for ones that combine back into pure water. What comes out has almost no dissolved solids left, so there is nothing to dry on the surface.
The resin has a limited capacity. Once it is used up, minerals start passing through again, so every DI system needs a way to tell you when to refill it: a colour change in the resin or a TDS (total dissolved solids) reading.
Which DI water filter should you choose?
Choose by how much water you use and whether you work at home or on the move. These are the systems we stock, from a simple inline filter to a professional trolley:
Aquaspray Spotless Inline Water Filter
A clear cartridge that fits into your existing hose. Its resin changes from blue to yellow as it is used up, so you can see at a glance when it needs refilling.
£23.95In stockAquaspray De-Ionising Water Filter Carry Tank
A portable pressure vessel in 10, 15 or 25 litre sizes, supplied full of resin, with brass hose fittings for a standard tap. It suits mobile detailers and anyone short of space.
Aquaspray Two-Stage De-Ionising Water Filter Trolley
Two resin stages on a wheeled trolley, the second one polishing the water from the first, for long sessions and high volumes.
£479.00In stockAquaspray Three-Stage De-Ionising Water Filter
A carbon pre-filter that extends resin life by up to 20 percent, then two DI resin cartridges. A built-in digital TDS meter shows incoming and outgoing water quality, and a bypass valve lets you filter only the final rinse.
£599.00In stockAquaspray Mixed Bed De-Ionising Resin
Replacement resin in 10 or 20 litre sizes for refilling DI vessels and cartridges.
If you wash cars for customers, our mobile valeting equipment list covers the rest of the kit.
How do you rinse a car with deionised water?
Wash the car as normal with tap water, then switch to DI water for the last rinse only. Using pure water for the whole wash empties the resin far faster without making the car any cleaner.
- Wash with tap water: pre-wash, foam and contact wash the car in your usual order, with the filter bypassed or disconnected.
- Rinse off the shampoo: give the car a thorough tap water rinse so no foam or product is left in the gaps.
- Switch to DI water: connect or open the filter and rinse the whole car again from the roof down.
- Finish with the glass: rinse the windows last so they are covered in pure water when you stop.
- Dry or leave it: pure water dries without mineral marks, but drying with a soft towel also takes off any dust that settles while it dries.
- Check the resin: look at the colour change or the TDS reading after every wash and refill before minerals start coming through.
How else can you reduce water spots?
Wash in the shade, keep panels cool, and do not let water sit and dry on the paint. A drying aid and a good towel make the biggest difference if you do not have a DI system.
Stjarnagloss Glatt Protective Rinse Aid
Sprayed onto each wet panel and rinsed straight off with a pressure washer, it leaves a water-repellent layer that sheets water away and reduces spotting as you dry. Keep it off hot panels, out of direct sun and off the windscreen.
Stjarnagloss Bubblor pH Neutral Shampoo
A pure, pH-neutral shampoo with limescale inhibitors that help reduce water spotting, used at around 1:800 for maintenance washes.
FibreKing Silver Label Drying Towel
A 1100 GSM double-layer towel that soaks up to seven times its own weight in water, so you can dry the car quickly.

Our drying towel guide explains towel size and pile, and our guide to washing your car safely covers the full wash routine.
Hard water should not be left to dry on paint protection film either, and our guide to washing a car with PPF covers the film's own routine.
Common questions
Will deionised water leave water spots?
Not mineral spots, because there are no dissolved minerals left to dry on the surface. Dirt or shampoo left on the car can still mark as it dries, which is why the tap water rinse before the DI rinse matters.

How long does DI resin last?
It depends on how hard your water is and how much you put through it. Hard water uses resin up faster. Watch the colour change or the TDS reading rather than going by time, and use DI water for the final rinse only to make it last.
Can you use a DI filter with a pressure washer?
Yes. Fit the filter between the tap and the pressure washer inlet and make sure it can supply the flow your machine needs, or use it with a hose for the final rinse instead.
Is deionised water the same as distilled water?
Both have very little dissolved content, but they are made differently: distilling boils and condenses the water, while DI filters exchange the minerals in a resin. For rinsing a car, a DI filter is the practical option because it works straight from the tap.
Need help choosing?
Tell the TDHQ team how often you wash and whether you work at home or on the move, and we will help you pick the right filter. You can also browse the Aquaspray range, our drying towels and our water spot removers.