The Duel Snow Foam Lance applies snow foam, pre-wash and lance-applied sealants such as Duel Flex. It has a stainless steel quick-release fitting and internal parts, a stainless nozzle and valve stem, and its threads are glued, so no PTFE tape is needed.
Two controls set the foam: the top dial changes the ratio of product to water for a thicker or wetter foam, and the nozzle turns from a direct jet to a wide fan. The 1 litre bottle is clear, strong PVC with a wide neck for filling without a funnel, ml markings on the side, and a wide base so it stands up on its own. The pickup tube has a metal filter to stop grit getting into the lance.
A quick-release connection comes as standard. Fittings for other pressure washer brands, including Karcher, Nilfisk, Lavor and Bosch, are in Adapters & Quick Connects, and a connection you already have from us will fit this lance. Not sure which you need? Read our guide to pressure washer fittings.
How to use
- Fit the dip tube to the underside of the lance body.
- Connect your fitting to the lance.
- Add the recommended amount of snow foam and water to the bottle, following the product's dilution.
- Screw the bottle onto the lance body and foam the car.
Technical Specifications
| Specification |
Details |
| Max pressure |
3200 PSI |
| Max water flow |
20 litres per minute |
| Bottle |
1 litre, wide neck, ml markings |
| Construction |
Stainless steel nozzle, valve stem and quick-release fitting |
| Threads |
Glued, no PTFE tape needed |
More in Snow Foam Lances and from Duel Autocare.