Colad Aqua Dynamic Masking Tape 38mm x 50m

38mm waterproof masking tape for wider trims

Colad Aqua Dynamic Masking Tape 38mm x 50m

SKU COLAD-TAPE-38 Ask a question

Ask a question

We reply by email, usually the same working day.

Notify Me When Back in Stock

By asking for an alert you also join The Drivers HQ email list for news and offers. You can unsubscribe at any time.

£3.95

Only 2 left

Size 38mm x 50m

Earn 3 HQ Rewards points How it works

Colad Aqua Dynamic Masking Tape 38mm x 50m Colad Aqua Dynamic Masking Tape 38mm x 50m £3.95

Complete your setup

Click & Collect: Ilkeston · FreeMost eligible orders are ready within 5 minutes during opening times. Please wait for your collection-ready confirmation before travelling. Click & Collect: Ilkeston Not available for this option. Options that can be collected show it here. How it works

This is the 38mm roll of Colad Aqua Dynamic Masking Tape, 50 metres long and the second widest of the four. The extra width covers plastic trim, rubbing strips and the gap between two panels in a single strip, which saves doubling up a narrow tape when you are masking a whole car before machine polishing.

  • Wider 38mm tape on a 50m roll
  • Covers wider trims and rubber before polishing
  • Saturated green crepe paper, waterproof
  • Silicone-free, rubber solvent based adhesive
  • Holds up to 120°C for 10 minutes
  • Excellent adhesion to rubber and metal
  • Comes away easily without residue
  • Suited to water-based and 2K paint systems
Read the full description

Full Description

This is the 38mm roll of Colad Aqua Dynamic Masking Tape, 50 metres long and the second widest of the four. The extra width covers plastic trim, rubbing strips and the gap between two panels in a single strip, which saves doubling up a narrow tape when you are masking a whole car before machine polishing.

Colad makes Aqua Dynamic for body shops that spray water-based paint, so the green crepe paper is saturated and waterproof. In detailing it is used to mask rubber seals and plastic trim before polishing by hand or machine, and to separate one panel from the next. The rubber adhesive grips steel, rubber and plastic and is made to peel off without leaving residue.

Other widths: 19mm x 50m, 25mm x 50m and 50mm x 50m.

Technical Specifications

Specification Details
Width 38mm
Length 50m
Backing Green crepe paper, saturated and waterproof
Adhesive Rubber, solvent based, silicone free
Suitable surfaces Steel, rubber and plastic
Heat resistance 120°C for 10 minutes, 90°C for 30 minutes, 80°C for 60 minutes
Colad part number 900438

More in Masking Tapes and from Colad.

Royal Mail Tracked 24 from £3.95, free over £100.Delivery details

Delivery and collection

Full Delivery Information

Buying for someone? Gift cards from £30, by email or post.Gift cards

Secure checkout
  • Apple pay
  • Diners club
  • Discover
  • Google pay
  • Klarna
  • Maestro
  • Master
  • Paypal
  • Shopify pay
  • Unionpay
  • Visa

Key features

  • 38mm x 50m
  • Trim Masking
  • Waterproof Paper
  • Heat Resistant
  • Silicone Free

The Drivers HQ

Expert Notes

Colad Aqua Dynamic Masking Tape 38mm x 50m is a saturated, waterproof green crepe paper tape with a rubber solvent based adhesive that Colad describes as absolutely free of silicones. The 38mm width is a practical choice for wider plastic trims, rubbing strips, bumper inserts and wiper scuttle panels, covering them in fewer runs before hand or machine polishing, and it can also separate panels into sections. Colad rates it at 120°C for 10 minutes, 90°C for 30 minutes and 80°C for 60 minutes, states excellent adhesion to rubber and metal, and designs it for professional users with water-based and 2K paint systems. Pair it with polishing pads, compounds and clean microfibre towels.

Perfect For / Suitable Surfaces

  • Wide plastic trims
  • Rubbing strips
  • Bumper trim inserts
  • Wiper scuttle panels
  • Rubber seals
  • Door handles
  • Panel section lines

Caution: Colad rates the tape for 80°C over 60 minutes, so remove it promptly after heat exposure and test on delicate or freshly painted surfaces first.

Technical Specifications

Product Type
Masking Tape
Brand
Colad
Material
Saturated Waterproof Green Crepe Paper
Use
Masking Trims And Rubber Before Polishing
Width
38mm
Roll Length
50m
Adhesive
Rubber Solvent Based, Silicone Free
Heat Resistance
120°C For 10 Min, 90°C For 30 Min, 80°C For 60 Min
Thickness
130 Micron Total, 95 Micron Backing
Paint Systems
Water-Based (Waterborne) And 2K
Application Surfaces
Steel, Rubber And Plastic
Colad Article Number
900438

How To Use

Using it

  1. Wash and dry the panels and trims so the tape sits on a clean surface.
  2. Identify the wider trims, rubbing strips and bumper inserts next to the paint.
  3. Lay the 38mm tape along the trim, keeping its edge tight to the panel line.
  4. On curved trims, apply shorter overlapping lengths rather than one stretched piece.
  5. Press the tape edge down firmly with a fingertip along its full length.
  6. Polish up to the tape, then peel it back slowly on itself at a low angle.

Cleaning and storage

  1. Remove the tape promptly once polishing or painting is complete.
  2. Wipe away polish dust left along the tape line with a clean microfibre towel.
  3. Discard used tape rather than reapplying it to another area.
  4. Keep the roll in a sealed bag or box to protect its edges from dust.
  5. Store the roll in a cool, dry place away from heat sources and sunlight.

Top Tip: Line the tape up along the panel edge first, then smooth it across the trim away from the paint.

Performance Benefits

  • Peels away cleanly after the job
  • Holds firmly on rubber and metal
  • Applies with a sharp, clean edge
  • Marks out panels into test sections
  • Suits hand and machine polishing
  • Suits water-based and 2K refinishing

Frequently Asked Questions

What size is this roll?

This roll of Colad Aqua Dynamic Masking Tape is 38mm wide and 50m long. Colad makes the same tape in 19mm, 25mm, 38mm and 50mm widths, all on 50m rolls.

What is 38mm masking tape used for in detailing?

It is used to mask trims and rubber before polishing by hand or machine, and to separate panels into sections. The 38mm width covers wider plastic trims, rubbing strips and bumper inserts in fewer runs.

How heat resistant is this tape?

Colad rates Aqua Dynamic Masking Tape for 10 minutes at 120°C, 30 minutes at 90°C and 60 minutes at 80°C. Remove it promptly after any heat exposure.

Is it waterproof?

Yes, the tape uses a saturated, waterproof green crepe paper backing. Colad states this makes it suitable for water-based paint systems.

Will it leave residue on trim or paint?

No, Colad states the tape can be removed easily and without residue. As with any masking tape, remove it promptly and peel it back slowly at a low angle.

What surfaces does it stick to?

Colad lists steel, rubber and plastic as application surfaces and states excellent adhesion to both rubber and metal. Apply it to clean, dry surfaces for a secure hold.

Is the adhesive silicone free?

Yes, Colad describes the adhesive as rubber solvent based and absolutely free of silicones. Silicone contamination can cause defects in fresh paint, so silicone-free masking is preferred for refinishing.

Can it be used for spray painting?

Yes, Colad designed Aqua Dynamic Masking Tape for professional users and water-based paint systems, and describes it as suitable where waterborne or 2K systems are used.

HQ Suggests Tips & Insights

  1. Use 38mm tape on wider trims, rubbing strips and bumper inserts.
  2. Make sure trims are clean and fully dry before taping.
  3. Use short overlapping lengths around curves, not one stretched piece.
  4. Press the edge down firmly along its full length.
  5. Stop the pad just short of the tape edge.
  6. Remove tape as soon as the panel is finished.
  7. Keep rolls bagged so dust cannot settle on the edges.
  8. Available with UK-wide delivery or from our walk-in store in Ilkeston, Derbyshire.

The Brand

Colad

Colad is a Dutch brand of bodyshop tools and consumables, owned by EMM International BV, with its head office in Zwolle in the Netherlands; EMM and Colad are now part of PPG. Colad develops its products with paint professionals to make preparation, masking, mixing, painting and finishing safer, quicker and better, and its range covers masking tapes, sanding sheets, paint mixing and spray systems and protective clothing.

At The Drivers HQ we stock Colad's Aqua Dynamic masking tape and waterproof sanding sheets online with UK delivery and in our Ilkeston shop. Popular choices include the 25mm Aqua Dynamic tape and the 2000 grit waterproof sheet.

Shop all Colad
Colad Aqua Dynamic green masking tape rolls and black 1500 grit waterproof sanding sheets on a black display plinth

Aqua Dynamic masking tape

Aqua Dynamic is Colad's green crepe masking tape for bodyshops spraying waterborne and 2K paint, and detailers use it to mask trim before machine polishing. It is silicone-free, with a solvent-based rubber adhesive on a waterproof crepe backing, 130 micron thick in total. Colad rates it at 120°C for 10 minutes, 90°C for 30 minutes or 80°C for 60 minutes.

Each roll is 50 metres, in four widths:

  • 19mm: the narrowest, for badges, door handles, washer jets and thin window rubbers, and tight curves.
  • 25mm: the general-purpose size, wide enough for a window rubber or trim strip, narrow enough to follow a wheel arch or light unit.
  • 38mm: covers plastic trim, rubbing strips and panel gaps in one strip when masking a whole car.
  • 50mm: the widest, for bumper inserts, wide arch trims, sills and windscreen surrounds.

Shop more masking tapes.

Colad Aqua Dynamic green masking tape being run along the window trim of a white car

Colad waterproof sanding sheets

Colad Waterproof Sheets are latex waterproof paper sheets, 230 x 280mm, for wet or dry sanding of small paint defects before polishing. We sell them as single sheets in four grits:

  • 1000 grit: the coarsest here, for levelling defects and refining the surface.
  • 1500 grit: ultra-fine refinement and defect removal before polishing.
  • 2000 grit: a fine finish before the final polish.
  • 3000 grit: the last step before machine polishing, for clear coat and spot repairs.

How to work. Wet sanding removes clear coat, so go one grit at a time from the finest that removes the defect, use plenty of water with a block or pad to keep the sheet flat, check often, and finish with a compound and polish to bring back the gloss.

Shop more wet sanding and specialist correction.

  • Product AdviceAsk for help choosing compatible products and equipment.
  • Trade MembershipTrade Members get 10% off every product except sale items and gift cards.
  • Shop in StoreBrowse products and speak to the team in Ilkeston.

Best Paired With

Customer Reviews

No reviews yet. Tell other drivers what you think of it.

HQ Rewards members who bought it earn 10 points for an approved review, 20 with a photo or video, whatever the rating. Review policy

    Write a Review

    Your rating

    NOT SURE THIS IS THE RIGHT ONE?

    Ask Before You Buy

    Tell us about the vehicle, surface, equipment or result you are working with. Advice is available before you buy, not only after something has gone wrong.

    Get Product Advice Visit the Ilkeston Store