Premium spray, foam and wash wax
High-gloss, lotus effect and protection. The innovative high-tech conserving wax sets new standards in matters of protection, durability, extreme deep gloss, long-term water repellence (lotus effect), easy-to-clean performance and vehicle drying without micro-beading.
High-gloss, lotus effect and protection. The innovative high-tech conserving wax sets new standards in matters of protection, durability, extreme deep gloss, long-term water repellence (lotus effect), easy-to-clean performance and vehicle drying without micro-beading.
The use of polyfunctional reactive components in combination with highest quality care components, which bond firmly with the surfaces as a network, guarantee perfect long-lasting high-gloss protection and improved visibility during rain (beading).
Improves with regular use the gloss and protection layer, covers fine scratches and all rubber and plastic parts as well as convertible fabric top materials are protected against fading and embrittlement. ProtectorWax thus makes a considerable contribution to maintaining the vehicle’s value. Can be used as hot, cold and foam wax (mechanically and manually).
Achieves optimum drying results even with high conductance values of the service water and with difficult fan geometries. Optimally suited for standard as well as for biological service water treatment plants. Contains no mineral oil hydrocarbons. VDA conform to class A.
Recommendations for use
Apply undiluted with dosing pump undiluted or in a ratio of up to 1:2. Recommended dosage per car: hot/cold wax: 13-19 ml. Foam wax: 13-19 ml. Premium wax: 16-23 ml. VDA conform to class A. Manual use: Pour approx. 30ml ProtectorWax into 1l water and apply it to the clean, still wet vehicle using a foam sprayer or pump dispenser and let it soak in. Rinse the product thoroughly using a pressure washer to avoid stains. If applying using a foam gun, adjust the pre-dilution accordingly. Pat dry any residual water. Only mix the product for one application and do not store.
Low stock, order soon
Fast UK
Free Delivery
Hassle-Free
Secure
Premium Protection Wax
High Gloss Finish
Hot Or Cold Wax
Foam Wax Use
The Drivers HQ
Simon HoleFounder, The Drivers HQ
Do not allow product residue to dry on the vehicle. Rinse thoroughly after application to avoid stains. Avoid hot panels, direct sunlight, interior surfaces, windscreens where visibility could be affected, matte paint, satin paint and unknown sensitive finishes unless compatibility has been confirmed.
Top Tip: ProtectorWax is designed for clean, wet vehicles. Do not use it like a dry quick detailer, and always rinse thoroughly after application to prevent residue marks.
Supports vehicle drying
Adds easy-clean behaviour
Builds with regular use
Useful for fast protection services
ProtectorWax is used after washing to add high gloss, lotus-effect water repellence, protection and drying support to clean vehicle exteriors.
Yes, it can be used manually as a diluted spray wax, but it can also be used as hot wax, cold wax, foam wax or through suitable wash systems.
Koch-Chemie recommends approximately 30ml of ProtectorWax in 1L of water for manual application.
Apply it to a clean, still wet vehicle, then rinse thoroughly.
Yes, rinse it thoroughly with a pressure washer to avoid stains or residue.
Yes, it can be applied using a foam gun, but the pre-dilution must be adjusted to suit the equipment.
Yes, Koch-Chemie states that rubber and plastic parts are protected against fading and embrittlement.
Koch-Chemie lists convertible fabric top materials as protected by the product when used correctly.
No, only mix the product for one application and do not store mixed solution.
This listing covers Koch-Chemie ProtectorWax in 1L and 10L.
The Brand
1A Shipley Court, Manners Industrial Estate, Ilkeston, DE7 8EF
Phone: 01332 479414
Email: info@thedrivershq.co.uk
