Wheel preparation
- Make sure the wheels are cool.
- Do not work in direct sunlight.
- Check wheel suitability before full use.
- Rinse loose dirt from the wheel if required.
- Shake the bottle briefly before use.
Reactive acid-free wheel cleaner
Magic Wheel Cleaner is a powerful, viscous, acid-free rim cleaner that provides innovative performance to mildly and thoroughly clean rims and rim wells.
Magic Wheel Cleaner is a powerful, viscous, acid-free rim cleaner that provides innovative performance to mildly and thoroughly clean rims and rim wells.
Its reactive component dissolves iron particles with characteristic red discolouration. Special dispersing agents gently remove stubborn dirt from surfaces. The viscous setting ensures that the sprayed-on Magic Wheel Cleaner adheres excellently to the surface. Dirt remains bound and the cleaner does not dry up, even after an extended application time.
Recommendations for use
Do not use on hot paints or surfaces or in direct sunlight. Check for suitability and compatibility prior to use. Shake Magic Wheel Cleaner briefly prior to use and spray the rim surface and rim well thoroughly. Depending on the amount of dirt, allow 2 - 5 minutes for Magic Wheel Cleaner to take effect on the rim and then rinse thoroughly using a high-pressure spray.
Low stock, order soon
The Drivers HQ
Do not use on hot wheels, hot paint, hot surfaces or in direct sunlight. Use caution on damaged, corroded, unlacquered, polished, anodised, matte, satin, bare metal, diamond cut or freshly refurbished wheels unless suitability has been confirmed.
Top Tip: Use Magic Wheel Cleaner when wheels need proper decontamination, not just a light maintenance clean. For already clean wheels, a shampoo wash or milder cleaner may be enough.
It is used to clean painted alloy wheels, high-quality chromed wheels and steel rims by removing brake dust, iron particles and stubborn wheel grime.
Yes, Koch-Chemie describes Magic Wheel Cleaner as an acid-free rim cleaner.
Yes, the reactive component dissolves iron particles and creates a characteristic red discolouration.
No, Koch-Chemie lists the pH value as 5.5. It is acid-free, but it should not be described as pH neutral.
No, always check compatibility first, especially on damaged, polished, anodised, matte, satin, bare metal, diamond cut or freshly refurbished wheels.
Koch-Chemie recommends 2 to 5 minutes depending on the level of dirt.
No, do not let it dry. Rinse thoroughly within the recommended dwell time.
Light contamination may rinse away after dwell time, but stubborn brake dust and tight areas may need a suitable wheel brush.
Yes, it is supplied ready to use and should be sprayed directly onto the wheel surface.
This listing covers Koch-Chemie Magic Wheel Cleaner in 500ml and 10L.
The Brand