The Active™ 2.0 Electric Pressure Washer Premium Kit is the Active 2.0 machine boxed with Active's own premium accessories, ready to wash and snow foam (Active code AP-SE03UK(02)/H75EU). Active says the accessory set was developed using customer feedback and expert guidance, and the gun, lance, hose and foam cannon all use fully machined 304 stainless steel fittings.
Active made the 2.0 for DIY detailers and hobbyists, drawing on customer feedback, its industry partners and over 20 years of making electric pressure washers. A patented 5-Piston Pro Pump and a Universal 9650 motor give 2 GPM, with 1100 PSI working pressure and 1800 PSI peak in Active's specification. At 431 x 203 x 228mm it wall mounts, sits on a detailing cart or packs into a van, and Active backs it with a 2 year residential warranty. Want the machine on its own? See the Active 2.0 Electric Pressure Washer. A lighter set is the Active 2.0 Standard Kit.
What is in the Premium Kit
-
Active 2.0 Electric Pressure Washer: the machine, with its 5-Piston Pro Pump and Universal 9650 motor.
-
M22-14mm to 3/8 adaptor: joins the machine's M22-14mm outlet to the 3/8 quick connect system of the kit hose.
-
Active 50 ft steel braided hose, 5/16": about 15 m of real rubber hose with steel braiding. Active chose the 5/16" size as the balance between the light weight of a 1/4" hose and the durability of a 3/8" hose. Fully machined 304 stainless steel quick connects with a 3/8" male plug and a female quick connect. Active rates its 50 ft hose to 4000 PSI and 12 GPM, at up to 212°F (100°C).
-
Active swivel gun: fully machined 304 stainless steel quick connects and an integrated internal swivel connection, a valve with a solid brass body and a stainless metal rod, a low-profile angle, a rubber grip and a low-force trigger. Rated to 5000 PSI and 12 GPM, at up to 300°F (149°C).
-
Active foam cannon: a fully machined 304 stainless steel quick nozzle head with adjustment for foam consistency, angle and pattern, on a leak-free 1000ml bottle with a flexible tube and a stainless steel weight ball. Rated to 4000 PSI and 4 GPM, at up to 140°F (60°C).
-
Active 20° bent lance: fully machined 304 stainless steel with integrated quick connects, a 1/4" male inlet and a 1/4" female outlet, in a nylon casing that makes it easier to manoeuvre around hard to reach areas. 20.5 inches (about 52 cm) long, rated to 5000 PSI and 12 GPM.
Technical Specifications of the machine
| Pump |
Patented 5-piston reinforced pump |
| Motor |
Universal 9650 reinforced motor |
| Water flow |
2 GPM (about 7.6 litres a minute) |
| Working pressure |
1100 PSI (about 76 bar) |
| Peak pressure |
1800 PSI (about 124 bar) |
| Max inlet water temperature |
40°C |
| Size |
431 x 203 x 228mm |
| Water inlet |
Needs a 3/4" standard garden hose adaptor |
| Switch |
Rocker switch |
| Warranty |
2 year residential warranty from Active |
| Product code |
AP-SE03UK(02)/H75EU |
Good to know
- The inlet needs a 3/4" standard garden hose adaptor.
- Active warns that any orifice you fit must keep the current draw under 15A, or the microswitch and capacitor can be damaged.
- Active strongly recommends steel braided hoses for the best performance.
- Keep the inlet water at 40°C or below, and squeeze the trigger to purge air before switching on.
HQ Suggests (Tips & Insights)
- 💡 Water flow is often more important than headline PSI figures for detailing work.
- 💡 Use filtered water where possible to reduce mineral build-up inside the pump.
More in Pressure Washers and from Active.